WHILE-LISTENING

Listen to the whole text without video and answer the following questions:

3. The text is:

a. a list of drawing equipment,

b. instructions on basic drawing,

c. history of drawing.

4. How many parts can you divide the text into?

Listen to the parts of the text and answer the following questions:

00:00 – 00:22

5. What equipment is mentioned in the text?

What equipment is mentioned in the text but wasn’t mentioned by you in “2” and vice versa.

Can you guess what the word “compass” means?

00:22 – up to the end

6. What do the following figures mean? Match the figures with the following words:

5mm, 10mm, 2H, 45°, 30/60°.

labels, set square, pencil, headings, set square

Listen and watch the video, check your answers.

7. Fill in the gaps in the following text:

(1)_____________________________Technique For this type of drawing you need the following (2) __________ : a sharp 2H (3) __________ ; and a (4) __________degree set square. You’ll also need a 30/60 degree set square and a (5) __________ . Using the(6) __________ : Make sure you put squares against the board, you can now (7) __________ using your (8) __________ and slide up and down across the (9) __________ , you can flip your set square to get the desired angle. Labels and (10) __________ : The conventions we (11) __________ are as follows: our labels are (12) __________ mm high. We usually draw a 5mm high guide line, measure it carefully, so it is 5mm high, not 7 or (13) __________ . We use only (14) __________without exception. I’m now going to put the (15) __________ down to show you the lettering that we use. We use plain, straightforward lettering. Whereas our labels are 5mm high, headings could be up to (16) __________ mm.

POST-LISTENING

8. What do the following words mean? Try to explain on your own:

compass, set square, to slide up and down

9. What are basic rules of drawing?

INDUSTRIAL PRODUCTION

Part I

SECTION A

Have you ever visited a factory? Did you find out anything interesting there?

<== попередня сторінка	\|	наступна сторінка ==>
TECHNICAL DRAWING	\|	Read the following text. What is the name of the company?

Не знайшли потрібну інформацію? Скористайтесь пошуком google:

Генерація сторінки за: 0.001 сек.