• Гідрологія і Гідрометрія
• Господарське право
• Економіка будівництва
• Економіка природокористування
• Економічна теорія
• Земельне право
• Історія України
• Кримінально виконавче право
• Медична радіологія
• Методи аналізу
• Міжнародне приватне право
• Міжнародний маркетинг
• Основи екології
• Предмет Політологія
• Соціальне страхування
• Технічні засоби організації дорожнього руху
• Товарознавство продовольчих товарів

Uses of Jute Fabric

· It is ideally used as bags and sacks for packing.

· It is used as a carrier and backing fabric for carpets, linoleum, cordage and twines.

· It is used as webbing to cover inner springs of the auto seats.

· It is used as upholstery of furniture.

· It is used as roofing and floor covering apparel, footwear lining, wall covering and furnishing fabric.

· It is used for erosion control.

· It is used as fashion accessories.

· It is used for fashion garments, tapestries, soft luggage, etc.

Process of making Jute Fabric

Jute fabric is obtained from the jute plant. It is an annual plant, which thrives best in moist soil in a hot and humid climate. The seeds are hand-sewn and the plants mature in 3 months with an average height of 10 to 12 feet. It gets light green leaves and small yellow flowers, blooming singly or in clusters. When these blossoms start shedding, the plants are harvested.

The stalks which are cut is sorted according to the length and gathered into bundles. These stalks are placed in shallow pools of stagnant water to loosen the fiber from the woody tissue. After enough softness is achieved, the fibers are separated and hung on lines to dry. These fibers are then sorted, graded, and baled and send to mills for spinning it into final products.

The strength, color and fineness of jute grown in different areas vary. To make it uniform, the different fibers are first blended. The jute is next fed into a softener where it is treated with oil and water and is passed between sets of heavy spiral fluted rollers. This process removes barky portions from the fiber. The fibers are carded in machines reducing the average length by teasing and combing.

The carded jute is fed into drawing machines where it becomes thinner and smoother. After this, it goes to the roving department, where it imparts a slight twist to the sliver and is send for spinning. Spinning converts it into a finished yarn.

Читайте також:

1. About Lycra Fabric
2. Advantages of Bamboo and Bamboo Fabric
3. Advantages of Suede Faux Fabric
4. Bamboo Fabric
5. Bamboo Fabric in Non-Woven Industry
6. Characteristics of Acrylic Fabric
7. Characteristics of Leather Fabric
8. Characteristics of Linen Fabric
9. Characteristics of Lycra Fabric
10. Characteristics of Polyester Fabric
11. Characteristics of Rayon Fabric
12. Characteristics of Silk Fabric

Переглядів: 484